IEEE CICC 2027 Call for Papers
Regular Paper Submission Opens: 24 August 2026
Regular Paper Submission FIRM Deadline: 16 November 2026
2027 IEEE Custom Integrated Circuits Conference (CICC)
Sponsored by the IEEE Solid-State Circuits Society
and the IEEE Circuits and Systems Society
April 18 – 22, 2027 – San Diego, CA, USA
Submission of original unpublished work in following areas:
Analog Circuits and Techniques encompasses circuits characterized by analog-dominated innovation, featuring building blocks such as amplifiers, comparators, frequency generation (oscillators and PLL) and clocking circuits, dividers, filters, references, nonlinear signal processing circuits, digitally-assisted analog circuits, sensor interface circuits.
Biomedical Technologies and Applications focuses on biomedical circuits, systems, and applications including but not limited to neural interfaces, microarrays, lab-on-a-chip, bio-inspired circuits, implantable and/or wearable systems, neuromodulation, electroceuticals, closed-loop systems with sensing and actuation, medical imaging, biotelemetry systems, bio-energy harvesting/scavenging systems, body area sensor networks for wireless health monitoring, biomedical signal processing SoCs, AI/ML techniques for mixed-signal biomedical applications, brain computer interfaces, and other biosensors.
Data Converters includes a range of innovative converters, such as Nyquist and oversampled A/D, D/A, time-to-digital, frequency-to-digital, and analog-to-information converters of all types driven by innovative techniques, architectures, technologies or applications.
Digital Circuits welcomes papers with IC prototypes in technologies that enhance the efficiency, performance, reliability, or integrity of integrated circuits and systems. Areas of interest include but are not limited to accelerators, interconnect fabrics, thermal management, memory, system clocking, adaptive circuits, and in-memory computing. Foundational hardware design building blocks, innovations in circuit-architecture co-design, and design techniques to advance AI efficiency and performance remain of interest. The demonstration of circuit innovations in relevant technology nodes is highly encouraged.
Advanced and Emerging Technologies solicits hardware-focused papers exploring the technologies of tomorrow, spanning new devices, circuits, packaging technologies, and advanced applications. Topics of interest include next-generation technology for MEMS; THz electronics; extreme-operating-condition electronics; flexible, printed, large-area, and organic electronics; advanced packaging technologies enabling heterogeneous integration, including novel substrates, interconnect materials, hybrid bonding, photonic integration, and 3D integration processes; as well as emerging computing paradigms such as Ising machines, superconducting electronics, and circuits for quantum computing hardware.
Systems and Security seeks papers on the latest advancements in system and platform design as well as hardware security. Relevant topics on system platforms include design methodologies and system-level innovations in SoCs and FPGA-based designs, hardware-software codesign, and large-scale platforms for conventional and emerging computing paradigms. Papers related to novel work on chiplets like 2.5D/3D chiplets, system-in-package (SiP), system-on-interposer, novel methodologies and EDA for system and platform design, test, packaging, power and thermal, and cross-disciplinary approaches bridging design, manufacturing, and system integration will be selected for a special session with the CHISIC Design Workshop. For the security category, contributions are invited on topics covering innovative security primitives, circuit-level attack/defense mechanisms, and approaches to secure system design.
Power Management solicits circuit and design techniques across the following domains: switched-mode integrated converters (inductive, capacitive, and hybrid), 3D power delivery for high performance computing and chiplets, energy harvesting, wireless power transfer, isolated power, power management for automotive applications, linear regulators and digital LDOs, circuits using wide-bandgap devices and dedicated drivers, battery chargers, supply modulators, and innovative methods to enhance overall system energy efficiency and performance.
Wireless Transceivers and RF/mm-Wave Circuits and Systems covers applications from IoT and cellular (5G, LTE-M, NB-IoT) to vehicle-to-vehicle (V2V), WLAN, THz systems, and integrated sensing-communication systems. Papers should focus on low-power, high-performance links, design-technology co-optimization, agile spectrum management, AI/ML-assisted designs, novel RF front-ends, frequency synthesis, and LO generation.
Wireline and Optical Communication Circuits and Systems welcomes papers on serial/parallel data links for intra-chip, chip-to-chip, die-to-die interconnections, memory and graphics interfaces, backplanes, silicon-photonics optical communications, 2.5/3D interconnects, and chiplet-based packaging solutions. Additionally papers on novel I/O circuits, signaling methods, bidirectional links, CDRs, equalizers, ADC/DAC/DSP-based transceivers, advanced detection mechanisms (such as MLSE), low-latency error correction, and electro-optical interface circuitry for pluggable and co-packaged optics are of interest.
Conference Technical Sessions and Events
Technical Sessions addressing a broad range of circuits, applications, design techniques, reliability, emerging technologies, and providing exposure to novel, state-of-the-art developments are the core of the CICC technical program.
Educational Sessions, led by distinguished invited speakers from both industry and academia, are included in the conference. These sessions provide valuable opportunities to refresh key skills in traditional circuit-design methods and acquire knowledge.
Panels, Forums and Keynote Sessions provide a platform for leaders from industry and academia to highlight new development directions and debate key issues and controversial topics.
Chiplets Solutions for Custom IC (CHISIC) Design Workshop is co-located with CICC as a platform for professionals and researchers to advance and grow the chiplet ecosystem.
Workshop on Internet of Bodies is co-located with CICC as a platform for professionals and researchers to advance and grow the biomedical circuits and systems ecosystem.
Our Welcome Reception and Keynote Luncheon provide additional opportunities for discussion and peer networking.
Paper Submission
Regular Technical Session Papers are 4 pages in length. Papers should be camera-ready and submitted electronically in PDF format using the CICC website instructions (www.ieee-cicc.org). Please follow the instructions on the submission website to provide a blind version for review and a complete version for publication. Appropriate company and government clearances MUST be obtained prior to submission. Papers must report original unpublished work and concisely explain how the state-of-the-art is advanced, and include measured experimental results that substantiate performance claims. FIRM DEADLINE for paper submission is 11:59 pm PT on 16 November 2026. Authors of accepted papers will be notified by email by 12 January 2027. Top-rated papers will be invited to special issues in the IEEE Journal of Solid-State Circuits, and IEEE Transactions on Biomedical Circuits and Systems.
For more information, please visit www.ieee-cicc.org.
General Chair: Carlos Tokunaga, Intel:
Conference Chair: Ulkuhan Guler, WPI:
Technical Program Chairs:
Shenggao Li, ExaFabric.AI:
Visvesh Sathe, Georgia Institute of Technology: